|Date/Report Number:.110214:EGST-AF43-3322 Item: : VINTAGE WYLER 30 SECOND 15 MINUTE TIMER|
|Description of item:
VINTAGE WYLER 30 SECOND 15 MINUTE TIMER
Estimated Retail Replacement Value $599.00
|Reports are supplied at the request of the customer and it is for the customer's exclusive use. Reports express an opinion of the time of the examination of the jewelry. This report is for customers use only for the following two purposes, indicating estimated retail replacement value to obtain insurance coverage, or for the purpose of providing geological information. goldsmith Works does not guarantee that the appraisal valuation will result in a sale at the price. Estimated retail replacement value is arrived after analyses of what the approximate high retail cash asking price is for labor, materials, and design. These prices may be substantially higher than actual transaction or warranty with regards to any item described in the report, since jewelry grading is not an exact science, this report represent the best opinion of the company. GoldSmith Works is in no case responsible for differences that occur by repeated grading by other experts in the field and/or use of other standards, norms, methods or criteria other than those used by GoldSmith Works. GoldSmith Works is expressly held harmless by customers including, but with out limitation for any claims or actions that may arise out of negligence in connection with the preparation of this laboratory report, or actions based upon the customer's use of the report. The information on the carat weight, clarity grade, color grade on the report is approximate due to the limitations in jewelry grading. The item was tested, graded, and examined under 10x magnification using the techniques and equipment available to GoldSmith Works, including fully corrected triplet loupe, binocular microscope, master color comparison guides, diamond color comparison tools, electronic carat balance, non-contact optical measuring device, and ancillary instruments necessary at the time of Exam|
The Wyler Incaflex balance wheel is protected along its diameter by two curved, elastic arms, which absorb any shocks to the balance wheel.
In addition to producing his own calibres, Wyler also modified movements of other large-scale producers and sold these on to other watch companies. In some cases, the basic calibre was changed so much that the movements should actually be considered as Wyler calibres.
In 1937 the WYLER INTRODUCED THE WATER-RESISTANT watch that was not fitted with the conventional soft gaskets.
The crystal was pressed in between the edge of the case and a pressed or screwed bezel, the gap between the winding shaft and the watch case was sealed hydraulically by fitting the winding shaft and bushing together, in the same material, to 1/500mm.
TWO PART HINGED BACK COVER
HINGED INNER DUST SHIELD
HINGED OUTER POLISHED COVER